Hongxin steel pill, trustworthy! Welcome to the Hongxin official website

Struggling with container weld seam rust and inconsistent roughness for KTA coatings? As a leading steel shot manufacturer, MALI provides intelligent graded abrasive blasting media to ensure precise Rz50-75μm profiles. Our custom graded abrasive solution

Mali Steel Shot at Fuzhou Maritime Expo 2026: Steel Grit vs Steel Shot for Offshore Wind Tower Anti-Corrosion

Shipyards stocking up for the season need four sizes, not one. Mali Steel Shot Technology, Booth 1A20 at the Fujian Marine Expo (October 17), lays out the four essential shot sizes: S330 thin-plate finishing, S390 general purpose, S460 heavy-rust rough bl

A ton of steel shot gone in days - many owners think it is normal wear, switch suppliers, and still burn through it. Mali Steel Shot (Wuhan Hongxin Lixin), 26 years in the trade, points to hardness, roundness and grading as the three parameters to check b

Offshore wind tenders from CNOOC (500 MW, 28 units of 18 MW) and Guangdong Energy Group (1,130 MW across three projects) landed within two weeks of each other. Tower shells, monopiles and jackets are all blast-cleaned onshore before coating. This article

Are you struggling with unstable fatigue life in automotive gear shot peening? As a premier steel shot manufacturer and steel grit supplier, Hongxin MALI delivers intelligent graded abrasive blasting media. Our custom graded abrasive solution ensures cons

October 13, 2026 — Wuhan Hongxin Lixin Metal Products (Ma Li Steel Shot) has made metal abrasives for 25 years. S330 (0.8–1.0 mm) suits thin plate and precision work for its lower impact; S460 (1.0–1.4 mm) cuts heavy rust on thick hull plate. Blasting rou

October 9, 2026 — Yulin, Beihai, Nanning and Chongqing Rongchang began issuing yellow heavy-pollution alerts, and blast cleaning was among the first processes to face curbs. On the same steel plate, the right steel shot and steel grit mix can halve collec

October 12, 2026 — S460 alloy cast steel shot (1.0–1.4 mm, HRC40–50) is the size most shipyards settle on for hull blasting. Enough impact to cut heavy rust, a profile that stays inside spec, and roughly 20% more cycles than standard cast shot. Low breaka

October 10, 2026 — For steel structure anti-corrosion blasting, S330 (0.8–1.2 mm) is the size most projects settle on. Medium hardness, an anchor profile depth that suits primer adhesion, longer life than S280 and lower consumption than S390. Our shot has